MACHINE TOOL CLEANER-AU is a powerful, effective cleaner for machine tools and central coolant systems. Mix it with water for use. This makes a quick acting solvent detergent solution that removes grease and gummy deposits from machine surfaces. It also purges caked residue and scum from coolant sumps, lines and fittings. Use it to clean return trenches and main reservoirs in central coolant systems
Appearance Clear amber liquid
pH 2% 9.8
Flash Point °C Not applicable
Density 15°C 1.00
Five simple steps to clean your machine –
Dump old fluid from system. Add enough fresh water for
Add 3 – 6 litres MACHINE TOOL CLEANER-AU per 100 litres of water in sump. Quantity required depends
on condition of equipment.
Circulate solution for one to two hours, or until all deposits are
Make sure that all surfaces to be cleaned are reached
by the solution. For caked deposits use high pressure flow to loosen. Residual deposits may trap live
bacteria that will re-infect the system so clean thoroughly.
Drain – flush with fresh water.
Add fresh coolant to the machine system.
For optimum effectiveness – add 0.5 – 1 litre MACHINE
TOOL CLEANER-AU per 100 litres to the system 24 hours
before the final cleaning above.